KV-XR29M80 - Sony TV Service Manual (repair manual). Page 8

Read Sony KV-XR29M80 Service Manual online

– 8 –
KV-XR29M80
RM-W104
• REMOVAL OF ANODE-CAP
Note:
• After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT
shield or carbon paint on the CRT.
• REMOVING PROCEDURES
Turn up one side of the rubber cap in the direction
indicated by the arrow 
a.
Using a thumb pull up the rubber cap firmly in the direc-
tion indicated by the arrow 
b.
When one side of the rubber cap is separated from the
anode button,  the anode-cap can be removed by
turning up the rubber cap and pulling it up in the
direction of the arrow 
c.
• HOW TO HANDLE AN ANODE-CAP
Do not damage the surface of anode-caps with
sharp shaped objects.
Do not press the rubber too hard so as not to
damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is
built into the rubber.
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage
the rubber.
a
a
b
b
c
anode button
1-10. PICTURE TUBE  REMOVAL
Note:
Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
1) Place the TV set with the CRT face down on a cushion jig
2) Remove the rear cover.
3) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
0
 Earth Coating Assy
4
 Anode Cap Removal
qa
 Band, DGC Removal
5 C Board Removal
9 Chassis Assy Removal
7 VM Board Removal
qs
 Holder, DGC(2) Removal
9
 Spring Tension(2) Removal
qf
 Screw Tapping 7 +
     Crown Washer
qd
 Degaussing Coil
6 Loosen the Neck Assembly
fixing screw and removal
8
 Loosen the Deflection Yoke
fixing screw and remove
Page of 95
Display

Click on the first or last page to see other KV-XR29M80 service manuals if exist.