Read Sony KV-XJ29N80 Service Manual online
–
8
–
–
KV
-XJ29N80
-XJ29N80
RM-915
Using Your New TV
4
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R
L
R
L
Y
C
B
COMPONENT VIDEO (DVD) IN
VIDEO
AUDIO
MONITOR
OUT
VIDEO
IN
C
R
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Using Your New TV
F connector
(not supplied)
(not supplied)
Rear of TV
Connecting a VCR
To watch the video input, press VIDEO (see page 12).
: Signal flow
or
Antenna cable (not supplied)
Antenna cable (not supplied)
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
AUDIO-L (MONO) (white)
AUDIO-R (red)
To video
and audio
outputs
and audio
outputs
Audio/Video cable
(not supplied)
To 8
(antenna
input)
(antenna
input)
To antenna
output
output
: Signal flow
VCR
To VIDEO IN 1 or 2
Rear of TV
Antenna cable
(not supplied)
Using Your New TV
5
Using Y
our New TV
Front of TV
Notes
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using VIDEO IN 1 or 2 jacks
at the rear of your TV or the VIDEO 2 INPUT jacks at the front of your TV.
at the rear of your TV or the VIDEO 2 INPUT jacks at the front of your TV.
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
• Do not connect video equipment to the VIDEO 2 INPUT jacks at the front
and VIDEO IN 2 (video input) jacks at the rear of your TV at the same
time; otherwise the picture will not be displayed properly on the screen.
time; otherwise the picture will not be displayed properly on the screen.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
CAUTION
• Do not connect the power cord until you have completed making all other
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 10).
• The AUTO PROGRAM button on the remote works as the AUTO
PROGR button on the TV.
AUTO
PROGR
1
1
2
3
1
2
3
CABLE: ON
AUTO PROGRAM
SLEEP
CABLE
AUTO
PROGRAM
ADD/
ERASE
PIC MODE
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Insert the batteries
into the remote
into the remote
Click on the first or last page to see other KV-XJ29N80 service manuals if exist.