Read Sony KV-XJ29M31 Service Manual online
– 8 –
KV
-XJ29M31/XJ29M50/XJ29M60/
-XJ29M31/XJ29M50/XJ29M60/
XJ29M80/XJ29M81
RM-952
Using Your New TV
4
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Using Your New TV
IEC connector
(not supplied)
(not supplied)
To video and
audio outputs
audio outputs
VCR
(yellow)
-L (MONO)
(white)
-R (red)
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
To antenna
output
output
Rear of TV
Rear of TV
Connecting a VCR
To watch the video input, press t (see page 13).
: Signal flow
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R
L
R
L
Y
C
B
C
R
To 8
(antenna
input)
(antenna
input)
To t 1 or 2
(video input)
(video input)
: Signal flow
or
Antenna cable (not supplied)
Antenna cable (not supplied)
Using Your New TV
Using Y
our New TV
5
Front of TV
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 10).
Note
• During automatic channel presetting, your TV screen will indicate “B/G” ,
• During automatic channel presetting, your TV screen will indicate “B/G” ,
“I”, “D/K” or “M” for the TV system (KV-XJ29M50/M80 (India)/
XJ29M80 (E/ME)/XJ29M50 (Thailand)/XJ29M81).
XJ29M80 (E/ME)/XJ29M50 (Thailand)/XJ29M81).
Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the 8 (antenna input) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• Do not connect video equipment to the t 2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen (KV-XJ29M31/XJ29M80 (E)/
XJ29M50/M80 (India)/XJ29M50/M60 (Thailand)).
not be displayed properly on the screen (KV-XJ29M31/XJ29M80 (E)/
XJ29M50/M80 (India)/XJ29M50/M60 (Thailand)).
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
CAUTION
• Do not connect the power cord until you have completed making all other
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Insert the batteries
into the remote
into the remote
AUTO
PROGR
1
VHF LOW B/G
1
2
1
Click on the first or last page to see other KV-XJ29M31 service manuals if exist.