Read Sony KV-XF29M50 (serv.man3) Service Manual online
– 9 –
KV
-XF29M50/XF29M65/XF29M81
-XF29M50/XF29M65/XF29M81
RM-954
5
Using Your New TV
Using Y
our New TV
AUTO
PROGR
1
ONE-PUSH AUTOMATIC PROGRAMMING
ONE-PUSH AUTOMATIC PROGRAMMING
AUTO PROGRAM
TV SYS:B/G
VHF LOW
VHF LOW
PR:01
PROGR
Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• If both
(S video input) and … 1 (video input) at the rear of your TV
are input at the same time, the
(S video input) is automatically
selected. To view … 1 (video input), disconnect the S video cable.
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
Step 2
Insert the batteries
into the remote
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Tip
• If you want to stop the automatic channel presetting, press MENU twice.
Note (KV-XF29M65 only)
• The TV system (TV SYS) is always “AUTO” in the AUTO PROGRAM menu.
• If you want to stop the automatic channel presetting, press MENU twice.
Note (KV-XF29M65 only)
• The TV system (TV SYS) is always “AUTO” in the AUTO PROGRAM menu.
Now You Are Ready. . .
To watch your TV, see page 9.
1
2
Front of TV
6
Using Your New TV
Connecting the 3D WOOFER
WOOFER
(8 )
3D WOOFER
Black wire
Red wire
(KV-XF29M65 only)
1
2
1
Attach the 3D WOOFER into the footholds on the top of your TV.
2
Connect the wires to the 3D WOOFER (8
Ω
) terminals at the rear of your TV.
The red wire should be connected to the ‘ red terminal and the black wire
to the ’ black terminal.
to the ’ black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring speaker terminal.
with the neighbouring speaker terminal.
You can enjoy high quality sound by connecting the 3D WOOFER.
Rear of TV
Click on the first or last page to see other KV-XF29M50 (serv.man3) service manuals if exist.