Read Sony KV-XF25N90 Service Manual online
– 8 –
KV
-XF25N90
-XF25N90
RM-914
SECTION 1
GENERAL
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remain as in the manual.
2
WARNING
• Dangerously high voltages are present inside the TV.
• Operate the TV only between 110 V AC.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
falls into it. Have it checked immediately by
qualified personnel only.
Do not open the cabinet and the rear cover of the
TV. Refer servicing to qualified personnel.
TV. Refer servicing to qualified personnel.
Do not install the TV in hot, humid or excessively
dusty places.
dusty places.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.
Do not pull the power cord to disconnect the TV.
Pull it out by the plug.
Pull it out by the plug.
Disconnect the power cord during lightning
storms or if you are not going to use the TV for
several days.
storms or if you are not going to use the TV for
several days.
Install the TV in a stable position. Do not allow
children to climb onto it.
children to climb onto it.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
power socket. Do not damage the power cord.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
4
Using Your New TV
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
WOOFER
(8 )
VIDEO IN
MONITOR
OUT
S VIDEO
AUDIO
VIDEO
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
CAUTION
Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
Connecting a VCR
To watch the video, see page 11.
Tip
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using the VIDEO IN 1 or 2
jacks, or the VIDEO 3 INPUT jacks at the front of your TV.
jacks, or the VIDEO 3 INPUT jacks at the front of your TV.
Using Your New TV
IEC connector
(not supplied)
(not supplied)
To video and
audio outputs
audio outputs
VCR
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
AUDIO-L (MONO) (white)
AUDIO-R (red)
To S video
output
output
Antenna cable (not supplied)
To VIDEO IN
1 or 2
1 or 2
Audio/Video cable
(not supplied)
(not supplied)
S video cable
(not supplied)
(not supplied)
: Signal flow
To S video
input
input
To antenna
output
output
To antenna
or
: Signal flow
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of TV
Rear of TV
Click on the first or last page to see other KV-XF25N90 service manuals if exist.