KV-XF25M50 (serv.man4) - Sony TV Service Manual (repair manual). Page 8

Read Sony KV-XF25M50 (serv.man4) Service Manual online

– 8 –
KV
-XF25M50
RM-954
SECTION  1
GENERAL
The operating instructions mentioned here are partial abstracts 
from the Operating Instruction Manual.  The page numbers of 
the Operating Instruction Manual remain as in the manual.
2
WARNING
•  Dangerously high voltages are present inside the TV.
•  Operate the TV only between 110 – 240 V AC.
To prevent fire or shock hazard, do not expose
the TV to rain or moisture.
Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.
Do not open the cabinet and the rear cover of the
TV. Refer servicing to qualified personnel.
Do not install the TV in hot, humid or excessively
dusty places.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.
Do not block the ventilation openings of the TV.
Do not pull the power cord to disconnect the TV.
Pull it out by the plug.
Disconnect the power cord during lightning
storms or if you are not going to use the TV for
several days.
Install the TV in a stable position. Do not allow
children to climb onto it.
Do not plug in too many appliances to the same
power socket. Do not damage the power cord.
Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.
4
Using Your New TV
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
WOOFER
(8
)
Getting Started
 Step 1
Connect the antenna
If you wish to connect a VCR, see the “Connecting a VCR” diagram below.
CAUTION
Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.
Connecting a VCR
To watch the video, press …
 (see page 10).
Using Your New TV
IEC connector
(not supplied)
To video and
audio outputs
VCR
 (yellow)
-L (MONO) (white)
-R (red)
To S video
output
Antenna cable (not supplied)
To  1 or 2
(video input)
Audio/Video cable
(not supplied)
S video cable
(not supplied)
: Signal flow
To 
(S video input)
To antenna
output
To ˘
(antenna)
or
: Signal flow
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of TV
Rear of TV
Page of 62
Display

Click on the first or last page to see other KV-XF25M50 (serv.man4) service manuals if exist.