Read Sony KV-XF25M50 (serv.man3) Service Manual online
– 2 –
KV-XF25M50/XF25M61
KV-XF25M80/XF25M93
KV-XF25M80/XF25M93
RM-954
SPECIFICATIONS
Note
Power requirements
110-240 V AC, 50/60 Hz
Power consumption (W)
Indicated on the rear of the TV
Television system
B/G, I, D/K, M
Color system
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58
Stereo system
NICAM Stereo B/G, I; A2 Stereo (German) B/G
KV-XF25M61/XF25M93 only
Teletext language
English, Arabic, French
KV-XF25M61 only
Channel coverage
B/G
VHF: E2 to E12 / UHF: E21 to E69 / CATV: S01 to S03, S1 to S41
I
UHF: B21 to B68 / CATV: S01 to S03, S1 to S41
D/K
VHF: C1 to C12, R1 to R12 / UHF: C13 to C57, R21 to R60
CATV: Z1 to Z39, S01 to S03, S1 to S41
CATV: Z1 to Z39, S01 to S03, S1 to S41
M
VHF: A2 to A13 / UHF: A14 to A79 /
CATV: A-8 to A-2, A to W+4, W+6 to W+84
CATV: A-8 to A-2, A to W+4, W+6 to W+84
˘
(Antenna)
75-ohm external terminal
Audio output
6W + 6W
3D WOOFER
15W
KV-XF25M93 only
Number of terminal
D
(Video)
Input: 3 Output: 1
Phono jacks; 1 V
P-P
, 75 ohms
≥
(Audio)
Input: 3 Output: 1
Phono jacks; 500 mVrms
(S Video)
Input: 2
Y : 1 Vp-p, 75 ohms,
unbalanced, sync
negative
negative
C : 0.286 Vp-p, 75 ohms
2
(Headphone)
Output: 1
Minijack
Picture tube
25 inch
Tube size (cm)
64
Measured diagonally
Screen size (cm)
60
Measured diagonally
Dimension (w/h/d, mm)
722
×
515
×
512
Except KV-XF25M93
Dimension (w/h/d, mm)
722
×
531
×
512
KV-XF25M93
Mass (kg)
38
Except KV-XF25M93
Mass (kg)
42
KV-XF25M93
Design and specifications are subject to change without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
!
ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR
CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR
CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
Click on the first or last page to see other KV-XF25M50 (serv.man3) service manuals if exist.