Read Sony KV-XA29M67 Service Manual online
–
10
–
KV
-XA29M67/XA29M97/XA34M67/XA34M97
-XA29M67/XA29M97/XA34M67/XA34M97
RM-953
8
Using Your New TV
Notes
• If your DVD player can output interlace and progressive mode signals,
• If your DVD player can output interlace and progressive mode signals,
select the interlace output when connecting to
(component video
input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz
interlace signals.
interlace signals.
• Some DVD player terminals may be labeled differently:
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”) in the
“ADJUST” menu of the “PICTURE MODE” menu (see page 24).
“ADJUST” menu of the “PICTURE MODE” menu (see page 24).
Connecting a DVD player using the
(component
video input) jacks
1 Connect R and L under
(component video input) on your TV to the LINE OUT,
AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, C
B
, and C
R
under
(component video
input) on your TV to the COMPONENT VIDEO OUT Y, C
B
, and C
R
output
connectors on your DVD player.
DVD player
To
L (white)
R (red)
L (white)
R (red)
Audio cable
(not supplied)
(not supplied)
To component video output
Component video cable (not supplied)
To audio
output
output
: Signal flow
To
(component
video input)
(component
video input)
Connect
To (on the DVD player)
Y (green)
Y
C
B
(blue)
C
b
, B-Y or P
B
C
R
(red)
C
r
, R-Y or P
R
VIDEO
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C
B
C
R
R
L
Y
C
B
C
R
Rear of TV
Connecting a DVD player using the t (video input) jacks
VIDEO
R-AUDIO-L
LINE OUT
1
2
3
L(MONO)
R
DVD player
Audio/Video cable
(not supplied)
(not supplied)
(yellow)
-L (MONO) (white)
-R (red)
-R (red)
To t 1, 2, or 3
(video input)
(video input)
: Signal flow
Rear of TV
Connecting optional components (contiuned)
9
Using Your New TV
Using Y
our New TV
Securing the TV
To prevent the TV from falling, secure the TV using one of the following methods:
A
With the supplied screws, attach the band to the TV stand and to the rear of
the TV using the provided hole.
the TV using the provided hole.
or
B
Put the cord or chain through the clamps to secure the TV against a wall or
pillar.
pillar.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
20
mm
mm
A
B
3.8 mm
or
Click on the first or last page to see other KV-XA29M67 service manuals if exist.