KV-XA29M60 - Sony TV Service Manual (repair manual). Page 8

–

 8 
–

4

Using Your New TV

1

2

3

R

L

Y

C

B

C

R

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R       L

CAUTION
• Do not connect the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries

from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.

If you wish to connect a VCR, see the Connecting a VCR diagram below.

To watch the video input, press t (see page 11).

To t 1, 2 or 3
(video input)

To 8
(antenna)

5

Using Your New TV

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

L(MONO)

3

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to   -L (MONO) (the white jack).

• If you connect  a VCR  to the 8 (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• If both 

 (S video input) and t 1 (video input) at the rear of your TV

are input at the same time, the 

 (S video input) is automatically

selected. To view the video input to t 1 (video input), disconnect the
S video cable.

• Do not connect video equipment to t 3 (video input) at the front and

the rear of your TV at the same time; otherwise the picture will not be
displayed properly on the screen.

• When no signal is input from the connected video equipment, the TV

screen becomes blue.

Note
• Do not use old batteries nor use different types of batteries together.

Tips
• If you want to stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 31).

Note
• During automatic channel presetting, your TV screen will indicate “B/G”,

“I”, “D/K” or “M” for the TV system (“TV SYS”).