KV-XA29K94 - Sony TV Service Manual (repair manual). Page 8

–

 8 
–

4

Using Your New TV

CAUTION
• Do not connect the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries

from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.

If you wish to connect a VCR, see the Connecting a VCR diagram below.

To watch the video input, press VIDEO (see page 12).

 

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R       L

1

2

3

R

L

Y

C

B

C

R

To 8
(antenna)

5

Using Your New TV

3

Notes
• If you connect a monaural AUDIO VCR, connect the yellow plug to

VIDEO (the yellow jack) and the black plug to AUDIO-L (MONO)
(the white jack).

• If you connect  a VCR  to the 8 (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• When both the S VIDEO and VIDEO IN 1 input are connected, the

S VIDEO input is automatically selected.  To view the video input to
VIDEO IN 1, disconnect the S video cable.

• Do not connect video equipment to the VIDEO 3 INPUT jacks at the front

and VIDEO IN 3 (video input) jack at the rear of your TV at the same time;
otherwise the picture will not be displayed properly on the screen.

• When no signal is input from the connected video equipment, the TV

screen becomes blue.

Note
• Do not use old batteries or different types of batteries together.

Tips
• To stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 10).

• The AUTO PROGR button on the remote works as the AUTO PROGR

button on the TV.