Read Sony KV-XA25P52A Service Manual online
– 2 –
KV-XA25P52A
RM-952
SPECIFICATIONS
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
Note
Power requirements
220-240 V AC, 50/60 Hz
Power consumption (W) Indicated on the rear of the TV
Television system
B/G
Color system
PAL, PAL 60, NTSC3.58 (AV IN), NTSC4.43
Stereo/Bilingual System A2 Bilingual B/G
Channel coverage
Channel coverage
VHF: E2 to E12
UHF: E21 to E69
CATV: S01 to S03, S1 to S41
UHF: E21 to E69
CATV: S01 to S03, S1 to S41
˘ (Antenna)
75-ohm external terminal
Audio output (Speaker)
5W + 5W
Number of terminal
D Video
Input: 3* Output: 1
Phono jacks; 1 V
P-P
, 75 ohms
*Two input lines available
≥ Audio
Input: 3* Output: 1
Phono jacks; 500 mVrms
*Two input lines available
(Component Video) Input: 1
Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
C
Y: 1 Vp-p, 75 ohms,
sync negative
C
B
: 0.7 Vp-p, 75 ohms
C
R
: 0.7 Vp-p, 75 ohms
Audio : 500 mVrms
2 (Headphone)
Output: 1
Stereo minijack
Picture tube
25 in.
Tube size (cm)
64
Measured diagonally
Screen size (cm)
60
Measured diagonally
Dimension (w/h/d, mm)
696
× 513 × 499
Mass (kg)
36
Design and specifications are subject to change without notice.
Click on the first or last page to see other KV-XA25P52A service manuals if exist.