KV-XA25M30A - Sony TV Service Manual (repair manual). Page 22

Read Sony KV-XA25M30A Service Manual online

– 22 –
KV
-XA25M30A/XA29M30A
RM-952
•REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and
the anode cap to the metal chassis, CRT shield or carbon paint on the
CRT.
•REMOVING PROCEDURES
1 Do not damage the surface of anode-caps with sharp shaped objects.
2 Do not press the rubber too hard so as not to damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is built into the rubber.
3 Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
• HOW TO HANDLE AN ANODE-CAP
3 When one side of the rubber cap is separated from the anode button,  the anode-cap

can be removed by turning up the rubber cap and pulling it up in the direction of the
arrow c.
2 Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow b.
1 Turn up one side of the rubber cap in the direction indicated by the arrow a.
Anode button
a
a
b
b
c
 !¢ Four DGC clips
!™
!¡
DGC
band
!∞ Demagnetic coil
4 Two screws 
(washer head)
(+P 4 
× 16)
!¶ Two screws
(Tapping)
5 Speaker
(15 
× 6.5cm)
3 Speaker
(15 
× 6.5cm)
7 Tension
spring
!• Chassis assy
8 Deflection
yoke
 9 VM1 Board
0 C6 Board
6 Anode cap
!ª Picture tube
CRT (Top,right)
Support Assy
(KV-XA29M30A only)  
CRT (Top,left)
Support Assy 
(KV-XA29M30A only)
1  Cushion
!§ Two screws
(Tapping)
2 Two screws 
(washer head)
(+P 4 
× 16)
!£
Holder DGC
CushionDGC
!¡ Cushion DGC
Two screws 
(+BVTP 4 
× 16)
Two screws 
(+BVTP 4 
× 16)
Two screws 
(+BVTP 4 
× 16)
Two screws 
(+BVTP 4 
× 16)
Tweeter Sheet
Tweeter Sheet
2-10. PICTURE TUBE REMOVAL
Note:
The picture tube for South Africa model is upside down, and the position
for the anode cap and tension spring are changed accordingly.
Display
Click on the first or last page to see other KV-XA25M30A service manuals if exist.
Random: