KV-XA25M30A - Sony TV Service Manual (repair manual). Page 11

–

 11 

–

Using Your New TV

10

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or – to enter the
“MANUAL PROGRAM”
mode.

Press PROGR +/– or the
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT to exit the
“MANUAL PROGRAM”
mode.

If the picture or sound is abnormal when receiving programs through the 8 (antenna)
terminal

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select the appropriate

TV system until the picture or sound
quality is optimal.

PROGR

SELECT

SELECT

Using Your New TV

11

If the color is abnormal when receiving programs through the 8 (antenna) terminal
or the t (video input) jack

(1) Press SELECT until “COLOR SYS” appears.

(2) Press + or – to select the appropriate

color system until the color is
optimal.

Tip
• Normally set “COLOR SYS” to “AUTO”.

Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.

Press SELECT until “MANUAL PROGRAM” appears.

Press + or – to enter the “MANUAL PROGRAM” mode.

Press PIC MODE.

Press SELECT to exit the “MANUAL PROGRAM” mode.

Note
• To restore the skipped program number again, preset the channel

automatically or manually.

Tip
• You can also use SELECT and 2 +/– on the TV to preset channels and

skip program numbers.

The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears.
(3) Press + or – to enter the “MANUAL PROGRAM” mode.
(4) Press 

 to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to exit the “MANUAL PROGRAM” mode.