Read Sony KV-XA21M83 Service Manual online
–
9
–
–
KV
-XA21M83/XA21M93/XA51M61/XA21P80
-XA21M83/XA21M93/XA51M61/XA21P80
RM-952
KV
-XA21N93
-XA21N93
RM-915
Using Your New TV
5
Using Y
our New TV
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
• Do not use old batteries nor use different types of batteries together.
Front of TV
Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a monaural VCR, connect the yellow plug to
(the
yellow jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
CAUTION
• Do not connect the power cord until you have completed making all other
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Insert the batteries
into the remote
into the remote
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 10).
Note (except KV-XA21P80/XA51M61)
• During automatic channel presetting, your TV screen will indicate
• During automatic channel presetting, your TV screen will indicate
“B/G” , “I”, “D/K” or “M” for the TV system.
AUTO
PROGR
1
1
VHF LOW B/G
1
2
2
L(MONO)
R
PROGR
SELECT
AUTO
PROGR
PROGR
!
Using Your New TV
6
Connecting the 3D WOOFER
(except KV-XA21P80/XA51M61)
You can enjoy high quality sound by connecting the 3D WOOFER.
1
Align the front of the 3D WOOFER to corners A and B of your TV. Place the
3D WOOFER into the footholds and adjust it until it is stable.
3D WOOFER into the footholds and adjust it until it is stable.
2
Connect the wires to the 3D WOOFER (8
Ω) terminals at the rear of your TV.
The red wire should be connected to the 3 red terminal and the black wire
to the # black terminal.
to the # black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring 3D WOOFER terminal.
with the neighbouring 3D WOOFER terminal.
Black
wire
wire
Red
wire
wire
WOOFER (8 )
– +
WOOFER (8 )
– +
3D WOOFER
1
2
Corner A
Corner B
Click on the first or last page to see other KV-XA21M83 service manuals if exist.