KV-TG21L70 - Sony TV Service Manual (repair manual). Page 8

– 8 –

Do not place any objects on the TV.

C

To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.

Screw the band to the TV stand and to the
provided hole at the rear of your TV.

(1) Put a cord or chain through the

clamps.

(2) Screw one clamp to a wall or pillar

and the other clamp to the provided
hole at the rear of your TV.

Note
• Use only the supplied screws.  Use of other screws may damage the TV.

Do not plug in too many appliances to the same
power socket.  Do not damage the power cord.

Pull the power cord out by the plug.  Do not pull
the power cord itself.  Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.

Install the TV on a stable TV stand and floor
which can support the TV set weight. Ensure that
the TV stand surface is flat and its area is larger
than the bottom area of the TV.

!

PROGR

SELECT

(MONO)

L

R

L(MONO)

R

8

6

1

3

4

7

9

2

5

0

qa

qs

D

1

!

Turn off completely or turn on the TV.

2

Remote control sensor.

3

1

Standby indicator.

3

Wake Up indicator.

4

PROGR +/–

Select program number.

5

2

 +/– *

Adjust volume.

6

t

Select TV or video input.

7

SELECT

Select the desired item.

8

i

Headphone terminal. (KV-TG21M80/TG21P52)

8

Earphone terminal. (KV-PG21L70 only)

9

, 

qa

t

Video input terminal.

0

8

Antenna terminal.

qs

T

Monitor output terminal.

* You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote.

E

Connecting to the video input terminal ( t )

Note
• Do not connect video equipment to t (video input) at the front and the rear of your TV at

the same time; otherwise the picture will not be displayed properly on the screen.

Connecting to the monitor output terminal (T)

(MONO)

L

R

★

L(MONO)

R

L(MONO)

R

(KV-TG21M80/TG21P52)

E

Connecting to the video input terminal ( t )

Note
• Do not connect video equipment to 

t

 (video input) at the front and the rear of your TV at

the same time; otherwise the picture will not be displayed properly on the screen.

Connecting to the monitor output terminal (T)

(KV-TG21L70 only)