KV-TF21M80 (serv.man3) - Sony TV Service Manual (repair manual). Page 9

–

 9 
–

5

Using Your New TV

Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 10).

Note (KV-HF14M80/TF21M80/XF21M83/XF21M80 only)
• During automatic channel presetting, your TV screen will indicate “B/G” ,

“I”, “D/K” or “M” for the TV system.

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the

yellow jack) and the black plug to  -L (MONO) (the white jack).

• If you connect  a VCR  to the ˘ (antenna) terminal, preset the signal

output from the VCR to the program number 0 on the TV.

• When no signal is input to the connected video equipment, the TV screen

becomes blue.

Note
• Do not use old batteries nor use different types of batteries together.

Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through the antenna
and other terminals to ground.

ONE-PUSH  AUTOMATIC  PROGRAMING

ONE-PUSH  AUTOMATIC  PROGRAMMING

6

Using Your New TV

You can enjoy high quality sound by connecting the 3D WOOFER.

WOOFER (8 )

L(MONO)

Attach the 3D WOOFER into the footholds on the top of your TV.

Connect the wires to the 3D WOOFER (8 

Ω

) terminals at the rear of your TV.

The red wire should be connected to the ‘ red terminal and the black wire
to the ’ black terminal.

Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may

malfunction.

• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make

sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring speaker terminal.