Read Sony KV-T25SZ8 Service Manual online
– 6 –
KV
-T25SZ8
-T25SZ8
RM-870
7
Operations
1
2
3
4
6
7
8
9
÷
0
5
Watching the TV
Switching off the TV
To switch off the TV temporarily, press POWER on the
remote commander.
remote commander.
To switch off the TV completely, press POWER on the
TV.
If the power on the TV is turned off in standby mode,
the STANDBY indicator may remain alight for a while.
TV.
If the power on the TV is turned off in standby mode,
the STANDBY indicator may remain alight for a while.
Watching the video input
Press VIDEO/HOLD.
1
Press POWER to turn the TV on.
To scan through channels
Press PROGR +/– until the channel you want
appears.
Press PROGR +/– until the channel you want
appears.
3
Press VOL +/– to adjust the volume.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
POWER, press POWER on the remote commander.
2
Select the TV channel you want to watch.
To select a channel directly
Press a number button.
Press a number button.
To select a two-digit channel, press “-/- -” before
the number buttons.
For example: to select channel 25, press “-/- -,” and
then “2” and “5.”
the number buttons.
For example: to select channel 25, press “-/- -,” and
then “2” and “5.”
POWER
Operations
HOLD
VIDEO
VIDEO
1
POWER
÷
2
5
VOL
PROGR
POWER
To watch TV, press TV.
Muting the sound
Press MUTING.
MUTING
MUTING
TV
Getting Started
6
MANUAL PROGR
COLOR SYSTEM
SELECT
TV SYSTEM
AUTO PROGR
POWER
Presetting channels
Presetting channels automatically
You can preset up to 80 TV channels in numerical
sequence from program position 1.
sequence from program position 1.
Front of TV
Note
•
TV SYSTEM button is not used for this model.
1
Press POWER.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
POWER, press POWER on the remote commander.
2
Press AUTO PROGR.
To start presetting channels automatically
from the specified program position
1
from the specified program position
1
Press MANUAL PROGR.
2
Press PROGR +/– to select the program position.
3
Press AUTO PROGR.
1
2
Presetting channels
1
2
1
2
3
1
AUTO PROGR
POWER
Presetting channels manually
To change the channel for a particular program
position or to receive a channel with a weak signal,
preset the channel manually.
position or to receive a channel with a weak signal,
preset the channel manually.
1
Press MANUAL PROGR.
2
Press PROGR +/– until the required program
position appears on the screen.
position appears on the screen.
3
Press VOLUME +/– on the TV until the
required channel picture appears on the
screen.
required channel picture appears on the
screen.
4
Press MANUAL PROGR.
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
you can skip those positions when you press PROGR
+/–.
1
Press PROGR +/– until the unused or
unwanted program position appears on the
screen.
unwanted program position appears on the
screen.
2
Press MANUAL PROGR.
3
Press PIC MODE on the remote commander.
4
Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
Preset the channel manually or automatically again.
Click on the first or last page to see other KV-T25SZ8 service manuals if exist.