Read Sony KV-T25MF1K Service Manual online
– 12 –
KV
-T25MF1K
-T25MF1K
RM-883
2-6. PICTURE TUBE REMOVAL
2
Using a thumb press down then pull up the rubber cap firmly in the direction
indicated by the arrow
indicated by the arrow
b
.
3
When one side of the rubber cap is separated from the anode button,
the anode-cap can be removed by turning up the rubber cap and pulling it up
in the direction of the arrow
the anode-cap can be removed by turning up the rubber cap and pulling it up
in the direction of the arrow
c
.
•
HOW TO HANDLE AN ANODE-CAP
1
Do not damage the surface of anode-caps with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-caps.
A metal fitting called the shatter-hook terminal is built into the rubber.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
The shatter-hook terminal will stick out or damage the rubber.
1
Turn up one side of the rubber cap in the direction indicated by the arrow
a
.
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and
the anode cap to the metal chassis, CRT shield or carbon paint on the
CRT.
CRT.
•
REMOVING PROCEDURES
2 A board
3 C board
5 Deflection yoke
Cushion
6 Four screws
(Tapping screws)
(Tapping screws)
1 Anode cap
4 VM board
a
a
b
b
c
Anode button
Click on the first or last page to see other KV-T25MF1K service manuals if exist.