Read Sony KV-SZ29M31 (serv.man2) Service Manual online
– 6 –
KV-SZ29M31/M60K
RM-GA002
1-8.
PICTURE TUBE REMOVAL
Note:
• The picture tube is upside down for KV-SZ29M31 (South Africa) only, and the position for the anode cap and tension springs
are changed accordingly.
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom right
and left.
1) Remove the rear cover.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap. Remove
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap. Remove
Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig.
qd
Loosen the Deflection Yoke
fixing screw and remove
qa
Earth Coating Assy
4
Anode Cap Removal
7 Band, DGC Removal (x1)
5 CV Board Removal
6 Loosen the Neck Assembly
fixing screw and remove VM coil
9
Holder, DGC Removal (x2)
8
Spring Tension Removal (x2)
qf
Screw Tapping
7+ Crown Washer
0
Degaussing Coil
qs
Supports, CRT(2) Removal
1-7.
K BOARD REMOVAL (KV-SZ29M60K)
1
Two Holders
2
K board
Click on the first or last page to see other KV-SZ29M31 (serv.man2) service manuals if exist.