KV-SZ292M50 - Sony TV Service Manual (repair manual). Page 11

– 10 –

Make a 'S' shaped loop on Conn Assy, 5P Front In  
as shown. Keep wires away from heatsink A010.

Next, Conn Assy, 5P Front In is dressed together with  
Lead Assy,Earth using purse lock Ø 5. Refer to 2-9.

Note: Dress while chassis is halfway docked into beznet.

CAUTION:
Prevent tie, cable from touching rear cover or any 
enclosures by turning them away from it --> avoid 
rattle sound. Also prevent tie, cable's end from  
touching solder side of board.

CAUTION:
Prevent tie, cable from touching rear cover or any 
enclosures by turning them away from it --> avoid 
rattle sound. Also prevent tie, cable's end from  
touching solder side of board.

i) Dress Conn Assy, 6P and Conn Assy, 4P VM using tie,
cable at alignment hole 'B' on CV board as shown.
ii) Dress Conn Assy, 4P 200V; Conn Assy, 6P; Conn Assy,
4P VM; Lead Assy, G2 and Lead Assy, Focus with purse
lock Ø 5.

  

Lead Assy, Earth

Lead Assy, Speaker

Heatsink A010

Conn Assy, 5P

Front In

Lead Assy, Earth

Conn Assy, 5P Front In

Heatsink A010

Tie, cable at alignment hole 'B'

Conn Assy, 6P

Conn Assy, 4P VM

Conn Assy

, 

4P

 VM

Conn Assy

, 

4P

 200V

Conn Assy

, 

6P

Conn Assy

, 

Focus

Conn Assy

, 

G2

Conn Assy, 4P 200V

Lead Assy, G2

Lead Assy, Focus

Pin, wire A707

Purse lock Ø 5

Purse lock Ø 5

Purse lock Ø 5

Lead Assy, Speaker is not dressed 

together with purse lock. Keep Lead Assy,  

Speaker away from heatsink A010 by

dressing it close to the CRT

Make a 'S' shaped loop on 

Conn Assy, 5P Front In 

and dress together with  

Lead Assy, Earth using 

purse lock Ø 5

Conn Assy, 5P

Lead Assy, Earth