Read Sony KV-SW292M50 (serv.man2) Service Manual online
– 8 –
KV-SW292M50/M60K/M80/M81/M90/SW292N90
RM-GA002
RM-CA002
1-17. PICTURE TUBE REMOVAL (Except KV-SW292M60K)
Note:
•
Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
right and left.
1) Remove the rear cover.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
Remove Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig.
6
Earth Coating Assy
4 Anode Cap Removal
5 Band, DGC Removal
8 C Board Removal
9 Chassis Assy Removal
0
VM Board Removal
qd
Holder, DGC
Removal(x2)
qs
Spring Tension Removal
(x2)
qg
Screw,Tapping 7 + Crown Washer(x4)
qf
Degaussing Coil
7 Loosen the Neck Assembly
fixing screw and removal
fixing screw and removal
qa
Loosen the Deflection Yoke
fixing screw and remove
1-18. PICTURE TUBE REMOVAL (KV-SW292M60K)
Note:
•
Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
right and left.
1) Remove the rear cover.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
Remove Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig.
6
Earth Coating Assy
4 Anode Cap Removal
5 Band, DGC Removal
8 C Board Removal
9 Chassis Assy Removal
0
VM Board Removal
qd
Holder, DGC Removal
(x2)
qs
Spring Tension Removal
(x2)
qg
Screw Tappping, 7 + Crown Washer(x4)
qf
Degaussing Coil
7 Loosen the Neck Assembly
fixing screw and removal
fixing screw and removal
qa
Loosen the Deflection Yoke
fixing screw and remove
Click on the first or last page to see other KV-SW292M50 (serv.man2) service manuals if exist.