Read Sony KV-SW25M31 Service Manual online
– 9 –
KV-SW25M50/M80/M90/SW25M31/M61/M91/SW25M60K
RM-W104
RW-W103
RM-W109
1-16. PICTURE TUBE REMOVAL (EXCEPT KV-SW25M60K)
Note:
•
Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
right and left.
1) Remove the Rear Cover.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
Remove Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig
9
Earth Coating Assy
7
Degaussing Coil
4
Anode Cap Removal
q;
C Board Removal
8
Spring Tension
Removal
5
Holder, DGC
Removal (x2)
qs
Loosen the Deflection Yoke
fixing screw and remove
6
Band, DGC Removal
qa
Loosen the Neck Assembly
fixing screw and remove Neck
Assy and VM board
Assy and VM board
qd
Screw, Tapping 7 +
Crown Washer (4)
1-17. PICTURE TUBE REMOVAL (KV-SW25M60K)
Note:
•
Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
right and left.
1) Remove the Rear Cover.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
Remove Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig
9
Earth Coating Assy
7
Degaussing Coil
4
Anode Cap Removal
q;
C Board Removal
8
Spring Tension
Removal
5
Holder, DGC
Removal (x2)
qs
Loosen the Deflection Yoke
fixing screw and remove
6
Band, DGC Removal
qa
Loosen the Neck Assembly
fixing screw and remove Neck
Assy and VM board
Assy and VM board
qd
Screw, Tapping 7 +
Crown Washer (4)
Click on the first or last page to see other KV-SW25M31 service manuals if exist.