Read Sony KV-SA293M50 Service Manual online
– 6 –
KV-SA293M50
RM-GA002
1-9.
PICTURE TUBE REMOVAL
Note:
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom right
and left.
1) Remove the rear cover.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap. Remove
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap. Remove
Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig.
1-7.
A BOARD REMOVAL
1-8.
F1 BOARD REMOVAL
1 Four screws
(3
(3
× 12)(+BVTAP)
2 Four Hooks
3 A Board
2 Two Hooks
3 F1 Board
1 One screw
(+BVTAP 3
(+BVTAP 3
× 12)
qa
Earth Coating Assy
4
Anode Cap Removal
8
Band, DGC Removal (
×1)
5 CV Board Removal
9
Holder, DGC Removal (
×2)
qs
Spring Extension Removal (
×2)
qf
Screw Tapping 7+
Crown washer
0
Degaussing Coil
6 Loosen the Neck Assembly
fixing screw and remove VM coil
7
Loosen the Deflection Yoke
fixing screw and remove
qd
Support, CRT Removal (x2)
Click on the first or last page to see other KV-SA293M50 service manuals if exist.