Read Sony KV-PG14N70 (serv.man2) Service Manual online
– 2 –
KV-PG14N70
RM-915
Power requirements
110 -240 VAC, 50/60 Hz
Power consumption (W)
Indicated on the rear of the TV
Television system
M
Color system
PAL*, PAL 60*, NTSC3.58, NTSC4.43*
*AV IN only
Channel coverage
VHF: 2 to 13
UHF: 14 to 69
CATV: 1 to 125
UHF: 14 to 69
CATV: 1 to 125
˘
(Antenna)
75-ohm external terminal
Audio output (Speaker)
3W
Number of terminal
VIDEO
Input: 2* Output: 1
Phono jacks; 1 Vp-p, 75 ohms
*One input line available
AUDIO
Input: 2* Output: 1
Phono jacks; 500 mVrms
*One input line available
@
(Earphone)
Output: 1
Monaural minijack
Picture tube
14 in
Tube size (cm)
37
Measured diagonally
Screen size (cm)
34
Measured diagonally
Dimension (w/h/d,mm)
375 x 346 x 411
Mass (kg)
12
Design and specifications are subject to change without notice.
SPECIFICATIONS
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
Note
Click on the first or last page to see other KV-PG14N70 (serv.man2) service manuals if exist.