KV-PF14DK7 - Sony TV Service Manual (repair manual). Page 11

–

 11 

–

9

Using Your New TV

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or –.

Press PROGR +/– or the
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT.

If the color is abnormal when receiving programs through the ˘ (antenna) terminal
or the 

… (video input) jack

(1) Press SELECT until “COL SYS” appears.

(2) Press + or – to select the appropriate color

system until the color is optimal.

Tip
• Normally set “COL SYS” to “AUTO”.

Note
• The color system “SECAM” is not available for KV-PF14P70/PF14P10.

The color system “NTSC3.58” is not available for KV-PF14Q70.

SELECT

PROGR

SELECT

10

Using Your New TV

If the picture or sound is abnormal when receiving programs through the ˘ (antenna)
terminal

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select the appropriate

TV system until the picture or sound
quality is optimal.

Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.

Press SELECT until “MANUAL PROGRAM” appears.

Press + or –.

Press PIC MODE.

Press SELECT.

Preset the channel automatically or manually.

Tip
• You can also use SELECT and 

¸

 +/– on the TV to preset channels and

skip program numbers.

The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.

You can use the fine tuning function as below:

(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press 

 

 to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to return to normal screen.