Read Sony KV-J25MF8J Service Manual online
– 14 –
• REMOVAL OF ANODE-CAP
NOTE :
Short circuit the anode of the picture tube and the anode cap
to the metal chassis, CRT shield or carbon paint on the CRT,
after removing the anode.
• REMOVING PROCEDURES
a
1
Turn up one side of the rubber cap in the direction
indicated by the arrow
a
.
b
b
2
Using a thumb pull up the rubber cap firmly in the direction
indicated by the arrow
indicated by the arrow
b
.
Anode button
c
3
When one side of the rubber cap is separated from the
anode button, the anode-cap can be removed by turning
up the rubber cap and pulling up it in the direction of the
arrow
anode button, the anode-cap can be removed by turning
up the rubber cap and pulling up it in the direction of the
arrow
c
.
• HOW TO HANDLE AN ANODE-CAP
1
Don't hurt the surface of anode-caps with sharp shaped
material!
material!
2
Don't press the rubber hardly not to hurt inside of anode-
caps! A material fitting called as shatter-hook terminal
is built in the rubber.
caps! A material fitting called as shatter-hook terminal
is built in the rubber.
3
Don't turn the foot of rubber over hardly! The shatter-
hook terminal will stick out or hurt the rubber.
hook terminal will stick out or hurt the rubber.
Click on the first or last page to see other KV-J25MF8J service manuals if exist.