Read Sony KV-J14M1J Service Manual online
– 9 –
1
Turn up one side of the rubber cap in
the direction indicated by the arrow
the direction indicated by the arrow
a
.
2
Using a thumb, pull up the rubber
cap firmly in the direction indicated
by the arrow
cap firmly in the direction indicated
by the arrow
b
.
1
Don’t hurt the surface of anode-caps with
sharp shaped objects!
sharp shaped objects!
2
Don’t press the rubber too hard so as not to
damage the inside of anode-caps!
A material fitting called the shatter-hook
terminal is built into the rubber.
damage the inside of anode-caps!
A material fitting called the shatter-hook
terminal is built into the rubber.
3
Don’t turn the foot of rubber over too hard!
The shatter-hook terminal will stick out or
damage the rubber.
The shatter-hook terminal will stick out or
damage the rubber.
•
HOW TO HANDLE AN ANODE-CAP
3
When one side of the rubber cap is
separated from the anode button,
the anode-cap can be removed by
turning up the rubber cap and
pulling it up in the direction of the
arrow
separated from the anode button,
the anode-cap can be removed by
turning up the rubber cap and
pulling it up in the direction of the
arrow
c
.
•
REMOVAL OF ANODE-CAP
NOTE : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the
CRT, after removing the anode.
•
REMOVING PROCEDURES
2-5. DEMAGNETIZATION COIL AND PICTURE TUBE REMOVAL
a
b
b
c
a
Anode button
2
A board
3
C board
4
Deflection yoke
Cushion
5
Four screws
(Tapping screws)
1
Anode cap
8
Picture tube
7
Spring
6
Demagnetization
coil
Click on the first or last page to see other KV-J14M1J service manuals if exist.