Read Sony KV-J14KD7 Service Manual online
– 13 –
KV
-J14KD7/J14KF7
-J14KD7/J14KF7
RM-883
2-6. PICTURE TUBE REMOVAL
b
b
2
Using a thumb press down, then pull up the rubber cap firmly in the direction
indicated by the arrow
indicated by the arrow
b
.
3
When one side of the rubber cap is separated from the anode button, the anode-
cap can be removed by turning up the rubber cap and pulling it up in the direc-
tion of the arrow
cap can be removed by turning up the rubber cap and pulling it up in the direc-
tion of the arrow
c
.
c
Anode button
•
HOW TO HANDLE AN ANODE-CAP
1
Do not damage the surface of anode-cap with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is built into the rubber.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
The shatter-hook terminal will stick out or damage the rubber.
Anode Button
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and the an-
ode cap to the metal chassis, CRT shield or carbon paint on the CRT.
•
REMOVING PROCEDURES
1
Turn up one side of the rubber cap in the direction indicated by the arrow
a
.
a
a
2 A board
3 C board
4 Deflection yoke
Cushion
5 Four screws
(Tapping screws)
(Tapping screws)
1 Anode cap
Click on the first or last page to see other KV-J14KD7 service manuals if exist.