Read Sony KV-J14KD5 Service Manual online
– 6 –
KV
-J14KD5/J14KF5
-J14KD5/J14KF5
RM-870
Getting Started
6
-EN
Connecting audio/video equipment using MONITOR OUT jacks
When recording through the MONITOR OUT jacks
If you change the channel or video input while recording with a VCR, the channel or video input you are recording also will be changed.
VIDEO
AUDIO
VIDEO
IN
MONITOR
OUT
Rear of TV
MONITOR OUT
p
KV-J14KD5
to video
and audio
inputs
and audio
inputs
to antenna socket
to antenna
output
output
VCR
or
Audio system
p
KV-J14KF5
VCR
Rear of TV
MONITOR OUT
VIDEO
AUDIO
R L (MONO)
VIDEO
IN
MONITOR
OUT
to antenna socket
to video
and audio
inputs
and audio
inputs
to antenna
output
output
or
: Signal flow
Audio system
: Signal flow
Getting Started
7
-EN
Presetting channels
Presetting channels automatically
You can preset up to 80 TV channels in numerical
sequence from program position 1.
sequence from program position 1.
Front of TV
1
Press POWER.
When the TV is in standby mode after pressing
POWER, press POWER on the remote commander.
POWER, press POWER on the remote commander.
2
Press TV SYSTEM until your local TV system
appears.
appears.
3
Press AUTO PROGR.
To start presetting channels automatically
from the specified program position
1
from the specified program position
1
Press MANUAL PROGR.
2
Press TV SYSTEM to select your local TV system.
3
Press PROGR +/– to select the program position.
4
Press AUTO PROGR.
Presetting channels manually
To change the channel for a particular program
position or to receive a channel with a weak signal,
preset the channel manually.
position or to receive a channel with a weak signal,
preset the channel manually.
1
Press MANUAL PROGR.
2
Press PROGR +/– until the required program
position appears on the screen.
position appears on the screen.
3
Press TV SYSTEM until your local TV system
appears.
appears.
4
Press VOLUME +/– on the TV until the
required channel picture appears on the
screen.
required channel picture appears on the
screen.
5
Press MANUAL PROGR.
If the TV system is not properly selected
The color of the picture may be poor and/or the sound
may be noisy. In this case, select the appropriate TV
system.
The color of the picture may be poor and/or the sound
may be noisy. In this case, select the appropriate TV
system.
1
Press PROGR +/– to select the program position.
2
Press TV SYSTEM until the picture and sound
become normal.
become normal.
Notes
•
If you do not know your local TV system, consult your nearest
authorized service center or dealer.
authorized service center or dealer.
•
The setting of the TV SYSTEM is memorized for each program
position.
position.
Disabling program positions
By disabling unused or unwanted program positions,
you can skip those positions when you press PROGR
+/–.
you can skip those positions when you press PROGR
+/–.
1
Press PROGR +/– until the unused or
unwanted program position appears on the
screen.
unwanted program position appears on the
screen.
2
Press MANUAL PROGR.
3
Press PIC MODE on the remote commander.
4
Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
Preset the channel manually or automatically again.
MANUAL PROGR
COLOR SYSTEM
SELECT
TV SYSTEM
AUTO PROGR
POWER
1
3
2
TV SYSTEM
POWER
B/G
D/K
AUTO PROGR
1
2
3
1
Click on the first or last page to see other KV-J14KD5 service manuals if exist.