Read Sony KV-HZ29M65 Service Manual online
– 3 –
KV-HZ29M65/HZ29M85/HZ29M90/HZ34M85
RM-1008
RM-1008
RM-1008
RM1008
(CAUTION)
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE
ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR CAR-
BON PAINTED ON THE CRT, AFTER REMOVING THE ANODE.
ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR CAR-
BON PAINTED ON THE CRT, AFTER REMOVING THE ANODE.
WARNING!!
AN ISOLATION TRANSFORMER SHOULD BE USED DURING
ANY SERVICE TO AVOID POSSIBLE SHOCK HAZARD, BE-
CAUSE OF LIVE CHASSIS.
THE CHASSIS OF THIS RECElVER IS DIRECTLY CONNECTED
TO THE AC POWER LINE.
ANY SERVICE TO AVOID POSSIBLE SHOCK HAZARD, BE-
CAUSE OF LIVE CHASSIS.
THE CHASSIS OF THIS RECElVER IS DIRECTLY CONNECTED
TO THE AC POWER LINE.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESECOMPONENTS WITH SONY PARTS WHOSE PART NUM-
BERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY. CIRCUIT ADJUSTMENTS THAT
ARE CRITICAL TO SAFEOPERATION ARE IDENTIFIED IN THIS
MANUAL. FOLLOW THESE PROCEDURES WHENEVER CRITI-
CAL COMPONENTS ARE REPLACED OR IMPROPER OPERA-
TION IS SUSPECTED.
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESECOMPONENTS WITH SONY PARTS WHOSE PART NUM-
BERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE-
MENTS PUBLISHED BY SONY. CIRCUIT ADJUSTMENTS THAT
ARE CRITICAL TO SAFEOPERATION ARE IDENTIFIED IN THIS
MANUAL. FOLLOW THESE PROCEDURES WHENEVER CRITI-
CAL COMPONENTS ARE REPLACED OR IMPROPER OPERA-
TION IS SUSPECTED.
TABLE OF CONTENTS
Section
Title
Page
––––––
––––
––––
1. SELF DIAGNOSIS FUNCTION
...........................
5
2. DISASSEMBLY
2-1.
REAR COVER ASSEMBLY ............................
9
2-2.
CHASSIS ASSEMBLY .....................................
9
2-3.
SERVICE POSITION ........................................
9
2-4.
SPEAKER BOX ASSEMBLY
(EXCEPT HZ29M90) ........................................
9
2-5.
T (EXCEPT HZ29M90) AND UG BOARDS ...
10
2-6.
BM AND MG BOARDS ...................................
10
2-7.
G1 (EXCEPT HZ29M90) AND A BOARDS ...
10
2-8.
D BOARD ..........................................................
11
2-9.
SF OR SFH (IRAN) BOARD ............................
11
2-10. H3, H4 AND H5 BOARDS ...............................
11
2-11. HARNESS ARRANGEMENT ..........................
12
2-12. REMOVAL OF ANODE-CAP ..........................
13
2-13. CRT .....................................................................
14
3. SERVICE MODE
3-1.
METHOD OF SETTING THE SERVICE
ADJUSTMENT MODE .....................................
15
3-2.
SERVICE MODE ADJUSTMENT ...................
15
3-3.
MEMORY WRITE CONFIRMATION
METHOD ...........................................................
15
3-4.
ADJUSTING BUTTONS AND INDICATOR ...
15
3-5.
SERVICE MODE LIST .....................................
16
4. SET-UP ADJUSTMENTS
4-1. INTIALIZING SFC DATA ...............................
47
4-2. BEAM LANDINGM ..........................................
47
4-3. CONVERGENCE ADJUSTMENT ...................
48
4-4. G2 (SCREEN) ADJUSTMENT .........................
50
4-5. FOCUS ADJUSTMENT 1 .................................
50
4-6. NECK ASSY TWIST ADJUSTMENT .............
51
4-7. PICTURE DISTORTION ADJUSTMENT .......
51
4-8. SFC COARSE ADJUSTMENT .........................
51
4-9. SFC FINE ADJUSTMENT ................................
53
4-10.P&P SUB CONTRAST
ADJUSTMENT (VIDEO) ..................................
54
4-11.P&P SUB-HUE AND SUB-COLOR
ADJUSTMENT (VIDEO) ..................................
54
4-12.WHITE BALANCE ADJUSTMENT ................
55
4-13.FOCUS ADJUSTMENT 2 .................................
55
5. SAFETY RELATED ADJUSTMENTS
5-1. +B MAX VOLTAGE CONFIRMATION .........
56
5-2. HV REGULATION CIRCUIT
ADJUSTMENT ..................................................
56
5-3. HV PRORTECTOR CIRCUIT CHECK ...........
56
5-4. IK PROTECTOR CIRCUIT
CHECK (D BOARD) .........................................
56
Click on the first or last page to see other KV-HZ29M65 service manuals if exist.