Read Sony KV-HW21M30 Service Manual online
– 3 –
KV-HW21M30/HW21N63
RM-W101
RM-W150
Note
Power requirements
110-240 V AC, 50/60 Hz
Power consumption (W) Indicated on the rear of the TV
Television system
M
Color system
NTSC3.58
Stereo/Bilingual system
MTS
Channel coverage
VHF: 2 to 13 / UHF: 14 to 69
CATV: 1 to 125
CATV: 1 to 125
8
(Antenna)
75-ohm external terminal
Audio output (Speaker)
3W + 3W
3D WOOFER
9W
Number of terminal
Video
Input: 2
Output: 1
Phono jacks; 1 V
P-P
, 75 ohms
Audio
Input: 2
Output: 1
Phono jacks; 500 mVrms
VIDEO 3 IN
Input: 1
Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
C
Y: 1 Vp-p, 75 ohms,
sync negative
C
B
: 0.7 Vp-p, 75 ohms
C
R
: 0.7 Vp-p, 75 ohms
Audio: 500 mVrms
2 (Headphone)
Output: 1
Stereo minijack
Picture tube
21 in.
Tube size (cm)
54
Measured diagonally
Screen size (cm)
51
Measured diagonally
Dimension (w/h/d, mm)
630 x 470 x 492
Mass (kg)
27
Design and specifications are subject to change without notice.
SPECIFICATIONS
(KV-HW21N63)
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD,
OR CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
Click on the first or last page to see other KV-HW21M30 service manuals if exist.