Read Sony KV-HW212M30 Service Manual online
– 4 –
KV-HW212M30/HW212M50/HW212M53/KV-HW212M85
RM-W101
RM-W100
KV-HW212N60/HW212N63
RM-W150
STANDBY (1) indicator
2. DISPLAY OF
STANDBY (1)
INDICATOR
FLASH COUNT
3. STOPPING THE
STANDBY (1)
INDICATOR FLASH
Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY (1)
indicator from flashing.
indicator from flashing.
4. SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as "power sometimes shuts off" or "screen sometimes goes off" that cannot be confirmed,
it is possible to bring up past occurrences of failure on the screen for confirmation.
it is possible to bring up past occurrences of failure on the screen for confirmation.
[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
Display
/ Channel 5 / Volume
/ Power
/ TV
˘
Note that this differs from entering the service mode (volume [+]).
Note that this differs from entering the service mode (volume [+]).
The following screen will be displayed indicating the error count.
Diagnostic Item
Flash Count*
+B overcurrent
2 times
V-Protect
4 times
IK (AKB)
5 times
Power Supply NG (+5V)
8 times
for Video processor
* One flash count is not used for self-diagnosis.
Lamp OFF 3 sec
Lamp ON 300ms
Lamp OFF 300ms
2 :
0
3 :
N/A
4 :
0
5 :
1
8 :
0
101 :
N/A
SELF DIAGNOSTIC
Numeral "0" means that no fault was detected.
Numeral "1" means the number of a fault occurrence (1 ~ 255).
Numeral "1" means the number of a fault occurrence (1 ~ 255).
Click on the first or last page to see other KV-HW212M30 service manuals if exist.