Read Sony KV-HW212M20 Service Manual online
– 7 –
KV-HW212M20
RM-W101
A Board
1-8.
A BOARD REMOVAL
1
J Board
Two screws (+BVTP 3
Two screws (+BVTP 3
× 12)
1-7.
J BOARD REMOVAL
(not used for this model)
1-9.
PICTURE TUBE REMOVAL
Note:
• The picture tube for South Africa model is upside down and position for the anode cap and tension springs are
changed accordingly.
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
1) Remove the rear cover.
2) Unplug all under connecting leads from the Deflection Yoke, Degaussing Coil and CRT grounding strap. Remove
2) Unplug all under connecting leads from the Deflection Yoke, Degaussing Coil and CRT grounding strap. Remove
Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig.
4
Degaussing Coil
8
C Board Removal
qa
Support, CRT(2) Removal
9
Loosen the Neck Assembly
fixing screw and removal
5
Holder, DGC(2)
Removal
6
DGC(2) Removal
7
Spring Tension (2)
Removal
qs
Screw, Tapping 5
+ Crown washer (4)
q;
Loosen the Deflection Yoke
fixing screw and remove
Click on the first or last page to see other KV-HW212M20 service manuals if exist.