Read Sony KV-HP21M53 Service Manual online
– 6 –
KV-HP21M53
RM-W101
1-9.
PICTURE TUBE REMOVAL
Note:
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom right
and left.
1) Remove the rear cover.
2) Unplug all interconnecting leads from the Deflection Yoke, Neck assy, Degaussing Coil and CRT grounding strap. Remove
2) Unplug all interconnecting leads from the Deflection Yoke, Neck assy, Degaussing Coil and CRT grounding strap. Remove
Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig.
1-8.
A BOARD REMOVAL
1-7.
J3 BOARD REMOVAL
1
J3 board
Two screws
(+BVTP 3X12)
(+BVTP 3X12)
A Board
qd
Nut, Special, CRT (x4)
4
Anode Cap Removal
6
Degaussing Coil
0
Loosen the Neck Assembly
fixing screw and remove
Neck Assy & VM board
Neck Assy & VM board
qa
Loosen the Deflection Yoke
fixing screw and remove
9
C Board Removal
7
Spring Tension
Removal (x2)
5
Holder, DGC
Removal (x2)
8
Earth Coating Assy
qs
Supports, CRT
Removal (x2)
Click on the first or last page to see other KV-HP21M53 service manuals if exist.