Read Sony KV-HF21M60 Service Manual online
– 2 –
KV-HF21L40/HF21M60
KV-HF21P50/HF51P50
KV-HF21P50/HF51P50
RM-952
SPECIFICATIONS
Note
Power requirements
110-240 V AC, 50/60 Hz
Power consumption (W)
Indicated on the rear of the TV
Television system
B/G,
Except KV-HF21M60
B/G, I, D/K, M
KV-HF21M60
Color system
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58 (AV IN)
KV-HF21L40
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58
KV-HF21M60
PAL, PAL 60, NTSC4.43, NTSC3.58 (AV IN)
KV-HF21P50/HF51P50
Stereo/Bilingual system
NICAM Stereo/Bilingual B/G, I; A2 Stereo/Bilingual (German) B/G
KV-HF21M60 only
A2 Bilingual B/G
KV-HF21P50 only
Channel coverage
B/G
VHF: E2 to E12 / UHF: E21 to E69 / CATV: S01 to S03, S1 to S41
I
UHF: B21 to B68/ CATV: S01 to SO3, S1 to S41
KV-HF21M60 only
D/K
VHF: C1 to C12, R1 to R12/UHF: C13 to C57, R21 to R60/
KV-HF21M60 only
CATV: S01 to S03, S1 to S41, Z1 to Z39
M
VHF: A2 to A13/UHF: A14 to A79/CATV: A-8 to A-2,
KV-HF21M60 only
A to W+4, W+6 to W+84
˘
(Antenna)
75-ohm external terminal
Audio output
5W + 5W
Number of terminal
D
(Video)
Input: 2 Output: 1
Phono jacks; 1 V
P-P
, 75 ohms
≥
(Audio)
Input: 2 Output: 1
Phono jacks; 500 mVrms
@
(Earphone)
Output: 1
Minijack (KV-HF21L40)
2
(Headphone)
Output: 1
Minijack (Except KV-HF21L40)
Picture tube
21 inch
Tube size (cm)
54
Measured diagonally
Screen size (cm)
51
Measured diagonally
Dimension (w/h/d, mm)
640
×
456
×
495
KV-HF21L40/HF51P50
640.0
×
456.0
×
488.5
KV-HF21M60/HF21P50
Mass (kg)
27
Design and specifications are subject to change without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
!
ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR
CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR
CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
Click on the first or last page to see other KV-HF21M60 service manuals if exist.