Read Sony KV-G21MW3 Service Manual online
–
12
–
KV
-G21MW3/G21QW3
-G21MW3/G21QW3
RM-869
2-7.
PICTURE TUBE REMOVAL
2
Using a thumb press down, then pull up the rubber cap firmly in the direction indicated
by the arrow
by the arrow
b
.
3
When one side of the rubber cap is separated from the anode button, the anode-cap
can be removed by turning up the rubber cap and pulling it up in the direction of the
arrow
can be removed by turning up the rubber cap and pulling it up in the direction of the
arrow
c
.
•
HOW TO HANDLE AN ANODE-CAP
1
Do not damage the surface of anode-cap with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is built into the rubber.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
The shatter-hook terminal will stick out or damage the rubber.
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of the picture tube and the
anode cap to the metal chassis, CRT shield or carbon paint on the CRT.
•
REMOVING PROCEDURES
1
Turn up one side of the rubber cap in the direction indicated by the arrow
a
.
2
A board
4
C board
5
Deflection yoke
Cushion
6
Four screws
(Tapping screws)
1
Anode cap
a
a
b
b
c
Anode button
Click on the first or last page to see other KV-G21MW3 service manuals if exist.