Read Sony KV-G14K7 Service Manual online
– 13 –
KV
-G14K7/G21KD7
-G14K7/G21KD7
RM-883
2-6. PICTURE TUBE REMOVAL
(1)
For KV-G14K7
(2)
For KV-G21KD7
•
HOW TO HANDLE AN ANODE-CAP
1
Do not damage the surface of anode-caps with sharp shaped objects.
2
Do not press the rubber too hard so as not to damage the inside of anode-caps.
A metal fitting called the shatter-hook terminal is built into the rubber.
A metal fitting called the shatter-hook terminal is built into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the rubber.
The shatter-hook terminal will stick out or damage the rubber.
3
When one side of the rubber cap is
separated from the anode button,
the anode-cap can be removed by
turning up the rubber cap and
pulling it up in the direction of the
arrow
separated from the anode button,
the anode-cap can be removed by
turning up the rubber cap and
pulling it up in the direction of the
arrow
c
.
2
Using a thumb pull up the rubber
cap firmly in the direction indicated
by the arrow
cap firmly in the direction indicated
by the arrow
b
.
1
Turn up one side of the rubber cap
in the direction indicated by the
arrow
in the direction indicated by the
arrow
a
.
•
REMOVING PROCEDURES
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit
the anode of the picture tube and the
anode cap to the metal chassis, CRT
shield or carbon paint on the CRT.
anode cap to the metal chassis, CRT
shield or carbon paint on the CRT.
2 A board
3 C board
4 Deflection yoke
Cushion
5 Four screws
(Tapping screws)
(Tapping screws)
1 Anode cap
2 A board
3 C board
4 Deflection yoke
Cushion
5 Four screws
(Tapping screws)
(Tapping screws)
1 Anode cap
a
a
c
Anode button
b
b
Click on the first or last page to see other KV-G14K7 service manuals if exist.