Read Sony KV-DR34M69 Service Manual online
– 9 –
KV-DR34M69/DR34M89
RM-991
$ Band, DGC(1) Removal (only top-side)
5 Anode Cap Removal
) Earth Coating Assy(2) Removal
7 Loosen the Neck Assembly
fixing screw and remove
9 Loosen the Deflection Yoke
fixing screw and remove
6 C Board Removal
! Chassis Assy Removal
8 VM Board Removal
( Spring Tension(2)
Removal
# Supports, CRT(2) Removal
& DGC(2) Removal
% Holder, DGC(2) Removal
~
Nut, Locking (4)
+
Nut special CRT (4)
" Bracket Woofer(2) Removal
1-12. H1 AND H2 BOARDS REMOVAL
1-13. A AND D BOARDS REMOVAL
1-14. PICTURE TUBE REMOVAL
Note:
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
• When removing the Nut Locking: first make sure to hold the Nut special CRT with a spanner while opening the Nut
Locking using a torque driver. Then proceed to remove the Nut special CRT using a torque driver.
1) Place the TV set with the CRT face down on a cushion (jig).
2) Removal the Rear Cover.
3) Removal the 3D Box.
4) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap.
2) Removal the Rear Cover.
3) Removal the 3D Box.
4) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap.
5 One screw
(3
(3
× 12)(+)(BVTP)
2 Three screws
(3
(3
× 12)(+) BVTP
3 Four hooks
5 One screw
(3
(3
× 12)(+)(BVTP)
1 Five connectors
6 Four hooks
7 D Board
4 A Board
3 Three hooks
1 Five hooks
4 Cover, H
2 H1 Board
5 H2 Board
Click on the first or last page to see other KV-DR34M69 service manuals if exist.