Read Sony KV-DR29M50 Service Manual online
– 6 –
KV-DR29M50/DR29M80
RM-991
SECTION 1
DISASSEMBLY
1-1.
REAR COVER REMOVAL
1-2.
SPEAKER REMOVAL
1-3.
CHASSIS ASSY REMOVAL
1-4.
SERVICE POSITION
1 Fourteen screws
(+BVTP 4 × 16
(+BVTP 4 × 16
2 Rear cover
Type 2 IT-3)
3D Speaker Box Assy
(not used for
these models)
these models)
1 Two screws
(+BVTP 4 × 16
Type 2 IT-3)
(+BVTP 4 × 16
Type 2 IT-3)
3 Two screws
(+BVTP 4 × 16
Type 2 IT-3)
(+BVTP 4 × 16
Type 2 IT-3)
2 Two screws
(Washer Head)
(+P4x16)
(Washer Head)
(+P4x16)
1-5.
SERVICE POSITION ON TV STAND
Note: 1) Remove the Rear Cover (refer 1-1)
- unscrew all 14 screws fixed on the Rear Cover. Hold
the top of the TV Cabinet; lift the Rear Cover slightly
upwards to release the Rear Cover foot from the TV
Stand and slide it backwards from the TV Cabinet.
upwards to release the Rear Cover foot from the TV
Stand and slide it backwards from the TV Cabinet.
2) Release the Lead Assy Speaker (left side)
3) Lift up the chassis and place it in the Service
3) Lift up the chassis and place it in the Service
Position as shown:-
Place the front of the main
bracket on to the foot of the
TV Cabinet
bracket on to the foot of the
TV Cabinet
Use a non elastic and non
conductive string to tie the
main bracket to the MFB
(metal hook on CRT)
conductive string to tie the
main bracket to the MFB
(metal hook on CRT)
Place the Terminal Bracket
edge into the hole on the
TV Stand foot
edge into the hole on the
TV Stand foot
Caution: 1) In Service Position, make
sure all the TV connections
are connected correctly
before turning on the TV
set.
are connected correctly
before turning on the TV
set.
2) The TV on the TV Stand
without Rear Cover is
unstable. As such be
careful not to push the TV
foward or backward
unstable. As such be
careful not to push the TV
foward or backward
Click on the first or last page to see other KV-DR29M50 service manuals if exist.