Read Sony KV-DR29M39 Service Manual online
34
Additional Information
continued
No picture
No sound
Good picture
No sound
Dotted lines or
stripes
stripes
Double images or
“ghosts”
“ghosts”
No color
Possible cause
Symptom
Solutions
Page
• The power cord,
antenna or VCR is not
connected.
connected.
• The TV is not turned
on.
• The volume level is too
low.
• The sound is muted.
• PIP sound is selected
when PIP is displayed.
• There is local
interference from cars,
neon signs, hair dryers,
power generators, etc.
neon signs, hair dryers,
power generators, etc.
• Broadcast signals are
reflected by nearby
mountains or
buildings.
mountains or
buildings.
• The antenna setup is
inappropriate.
• Use of a booster is
inappropriate.
• The color level setting
is too low.
• The color system
setting is
inappropriate.
inappropriate.
• The antenna setup is
inappropriate.
• Check the power cord, antenna and VCR
connections.
• Press
?/1
(power).
• Press ! (main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
turn it on again.
• Press 2 + to increase the volume level.
• Press % to cancel the muting.
• Press SOUND or
.
• Do not use a hair dryer or other
equipment near the TV.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Use a highly directional antenna.
• Use the fine tuning (“FINE”) function.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Turn off or disconnect the booster if it is in
use.
• Display the “PICTURE” menu and select
“ADJUST” of “PICTURE MODE”, then
adjust the “COLOR” level.
adjust the “COLOR” level.
• Display the “SETUP” menu and check the
color system (“COLOR SYS”) setting
(usually set this to “AUTO”).
(usually set this to “AUTO”).
• Check the antenna setup. Contact a Sony
dealer for advice.
31
9
8
9
9
13
–
–
–
30
–
–
22
26
–
Click on the first or last page to see other KV-DR29M39 service manuals if exist.