Read Sony KV-DA28M36 Service Manual online
– 8 –
KV-DA28M36/M64
RM-W105
1-14. PICTURE TUBE REMOVAL
Note:
•
The picture tube is upside-down for KV-DA28M36 (Oceania) model and the position for the anode cap and tension
spring are changed accordingly.
spring are changed accordingly.
•
Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
right and left.
•
When removing the Nut Locking: first make sure to hold the Nut special CRT with a spanner while opening the Nut
Locking using a torque driver. Then proceed to remove the Nut special CRT using a torque driver.
Locking using a torque driver. Then proceed to remove the Nut special CRT using a torque driver.
1) Remove the rear cover.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
2) Unplug all interconnecting leads from the Deflection yoke, Neck assy, Degaussing Coil and CRT grounding strap.
Remove Chassis Assy.
3) Place the TV set with the CRT face down on a cushion jig
1-13. A AND D BOARDS REMOVAL
5
Two screws
(Washer Head)(+P3
× 12)
2
Five screws
(3
× 12)(+) BVTAP
3
Two Hooks
1
Five connectors
6
Five Hooks
4
D Board
7
A Board
4
Anode Cap Removal
8
Earth Coating Assy(2) Removal
q;
Loosen the Neck Assembly
fixing screw and remove Neck
Assy and VM board
fixing screw and remove Neck
Assy and VM board
qa
Loosen the Deflection Yoke
fixing screw and remove
fixing screw and remove
9
C Board Removal
7
Spring Tension
Removal (x2)
Removal (x2)
5
Holder, DGC
Removal (x2)
Removal (x2)
qs
Supports, CRT
Removal (x2)
Removal (x2)
6
Degaussing Coil
qd
Screw (5) Tapping
Click on the first or last page to see other KV-DA28M36 service manuals if exist.