Read Sony KV-BZ213M10 Service Manual online
– 13 –
KV-BZ213M10, M40, M50, P50, BZ216M80/H, M81
RM-GA002
2-13. HV Lead Assy Dressing
2-14. AC Power Cord Dressing
A
45
B
A
A
A
C
SAFETY OPERATION
HV Holder
180 ± 5
Purse Lock
HV Holder Combi
Dress HV Holder
Combi with
Purse Lock Ø9
Combi with
Purse Lock Ø9
Fix the bigger
diameter hook of
HV Holder Combi
on the right side of
black tape & at
horizontal bending
of DGC, then use
purse lock Ø9 to
secure HV Holder
Combi to DGC
diameter hook of
HV Holder Combi
on the right side of
black tape & at
horizontal bending
of DGC, then use
purse lock Ø9 to
secure HV Holder
Combi to DGC
HV Holder Combi
Dress AC Power Cord at PWB Bracket hook as shown
Dress AC Cord Holder at the terminal bracket
PWB Bracket hook
Terminal bracket
AC Cord
AC Power Cord
Purse Lock
DGC
DGC Conn
Black tape
Place purse lock Ø9 after the exit of DGC
Conn from DGC
Conn from DGC
TVSR (Clause 9.4.7):
A) Spacing between HV cable and conductive part's
A) Spacing between HV cable and conductive part's
surface --> 1mm/kV or more
B) Spacing between edge of anode cap and conductive
parts --> 0.5mm/kV or more
C) Spacing between HV cable & enclosure with
ventilation (i.e. Rear Cover side) --> 10mm or more
CAUTION:
Keep HV cable facing inwards DY to keep HV cable
away from ventilation side of rear cover --> 10mm or
more.
Ensure TVSR 1mm/kV is kept from HV cable to DY &
other conductive parts
Keep HV cable facing inwards DY to keep HV cable
away from ventilation side of rear cover --> 10mm or
more.
Ensure TVSR 1mm/kV is kept from HV cable to DY &
other conductive parts
Click on the first or last page to see other KV-BZ213M10 service manuals if exist.