Read Sony KV-36XBR800 (serv.man2) Service Manual online
— 10 —
KV-36XBR800
1-1. REAR COVER REMOVAL
SECTION 1: DISASSEMBLY
1
CAUTION! - Heat sink on IC5004 is -15V. Care must be
taken not to allow heat sink to touch any other components.
2
Lift lever on front bracket to release and gently pull the back
chassis assembly away from the bezel.
Pull up and rotate both the A and D Boards in order to service
the unit.
the unit.
When plugging in connector from HM Board to B Board at
CN3603 insure two brown wires are facing upward towards
neck assembly.
CN3603 insure two brown wires are facing upward towards
neck assembly.
1
Lift lever up on the right and left sides of the chassis
bracket and gently pull the chassis assembly away from
the bezel.
the bezel.
3
4
Rear Cover
5 Screws
+BVTP 4 x 16
+BVTP 4 x 16
3 Screws
+BVTP 4 x 16
+BVTP 4 x 16
4 Screws
+BVTP 4 x 16
+BVTP 4 x 16
1-2. CHASSIS ASSEMBLY REMOVAL
1-3. SERVICE POSITION
Click on the first or last page to see other KV-36XBR800 (serv.man2) service manuals if exist.