KV-36FS70 - Sony TV Service Manual (repair manual). Page 11

11

*depending on availability of service.

NexTView is an electronic programme guide with up to 1 week* of programme information for all channels supporting EPG.
*If the data exceeds the memory of NexTView, you will receive less than 7 days’ information.

At first you need to select a channel providing a NexTView service.  In this case the indication ‘NexTView’ is displayed as soon 
as all data is available.  

1. Press the 

 button repeatedly on the remote control to switch NexTView on and off.

2. Press the 

v, V, b or B buttons to move the cursor around the screen.

3. Press the OK button to confirm a selection.

a. If you press the OK button in the date, time or icon (themes) columns, you change the programme list according to the 

selection.

b.  If you press the OK button in the programme list, you directly display the channel if the broadcast is currently running,

or, you display the ‘Long Info’ menu if the broadcast is running at some future time.

*

full selection list

*

personal selection

*

news broadcasts

*

movies

*

sports

*

entertainment

*

children

*

return to last menu

7

Tue

07 Tue

12:38

8

Wed

10
Fri

11

Sat

12

Sun

13

Mon

9

Thu

12

SWISS

Star Wars
Super RTL

Hat der alte Hexenmeister sich doch
einmal fortbegeben, und nun sollen
seine Geister auch nach meinem Willen
leben.

Werner - Beinhart
Pro 7

Flui grüsst den Rest der Welt
Kabel 1

Once upon a time in the West
Euronews

International News
RTL Plus

10:35 - 12:45

10:20 - 12:00

10:45 - 10:50

11:00 - 11:20

11:45 - 12:50

TXT

TPS / RINGIER

Tue 07. 04 .98

When you select the 

 icon, you can make your own individual selection of themes, limiting the search to the marked ones. 

1. Press 

v or V to select the 

 icon then press 

B to display the ‘Individual Setting’ menu.

2. Press 

v or V to select your chosen item on the screen then press the OK button to confirm your choice.  

3. Repeat step 2 for all the items you wish to have in your list.

4. When you have finished the list, press 

B

 to select 

 on the menu screen.

5. Press the OK button. 

 

1. Press 

v or V to select a future programme in the programme list column.

2. Press the OK button to display the ‘Long Info’ menu.

3. If you have a Smartlink VCR and wish to record the selected programme with your VCR, press 

b to select 

 then press 

the OK button to download the information to your VCR.

4. To set up the VCR:

VPS/PDC
Press 

b repeatedly to select VPS/PDC then press the OK button to select ‘On’ or ‘Off’.  With this setting on you have the

guaranteed recording of the whole broadcast should there be a change in the TV programme. This only works if the selected
channel broadcasts a VPS/PDC signal

Speed
Press 

V to select ‘Speed’ then press the OK button to select ‘SP’ for standardplay or ‘LP’ for 

longplay.  With longplay you can record twice as much on a videotape.  The picture quality however may suffer.

VCR Setup
Press 

V to select ‘VCR Setup’ then press the OK button to select which VCR you wish to programme, namely ‘VCR1’ or ‘

VCR2’.

5. Finally, press 

B to select the 

 icon then press the OK button to remove the menu from the TV screen.

07 Tue

12:38

Address Mapping

The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.

If other values are set, the complete
combination will be scrolled.

Example:
if the DPWC is set to '63', the char-

Speed
Timer Prog

VPS/PDC

SP

VCR1

On

This channel has been set for a timer

First nextTView/EPG-Providers in Europe

SWISS

TXT

TPS / RINGIER

nexTView

Tue 07. 04 .98