Read Sony KV-36FS12 Service Manual online
—
27
—
KV-36FS12/36FS16/36FV16/36FV26
5-6. PROGRAM PALETTE SETTINGS
To Program Program Palette RESET Levels
1. Switch to Program Palette to edit.
2. Enter Service Mode.
3. Set desired values for current Program Palette settings.
4. Write into memory by
then
.
5. Repeat steps 1-4 for each palette.
Example
To Set RESET Level of Standard Mode to 60%
1. Switch to STANDARD Palette.
2. Enter Service Mode.
3. Change value of VPIC to 38 (38/63 = 60%)
4. Write into memory by
then
.
5. Enter Video Menu and press
.
6. Reset level of picture for STANDARD PALETTE ONLY is
now 38 steps.
5-7. A BOARD ADJUSTMENTS
Sub Contrast Adjustment (RDRV, RDR4)
1. Input a 75% color-bar signal.
2. Set to: VIDEO mode = Standard, COLOR = Minimum,
PICTURE = 100%, GON = 0 (OFF), BON = 0 (OFF)
3. Set to Service Adjustment Mode and connect an oscilloscope
to pin
of CN351 on the A Board.
4. Set RDRV with and .
5. Adjust with and for: 1.95 ± 0.05 Vp-p.
6. Write into memory by
then
.
7. Repeat steps 1-6 for RDR4 using Video 4 input.
1.95 ± 0.05 Vp-p
White
Black
Sub Bright Adjustment (SBRT)
1. Set to Service Adjustment Mode.
2. Input a gray scale pattern signal.
3. Set the PICTURE to minimum, and BRIGHT to normal.
4. Select SBRT with and .
5. Adjust SUB BRIGHT level with and so that the stripe
second from the right is faintly visible.
6. Write into the memory by pressing
then
.
white
black
second from the right
Sub Hue, Sub Color Adjustment
(T2HU, T2CO, V2HU, V2CO, 4SHU, 4COL)
(T2HU, T2CO, V2HU, V2CO, 4SHU, 4COL)
Note:
T2HU and T2CO are for Tuner inputs.
V2HU and V2CO are for all other Video inputs.
4SHU and 4COL are for Video 4 input.
V2HU and V2CO are for all other Video inputs.
4SHU and 4COL are for Video 4 input.
1. Input a 75% color-bar signal.
2. Set to Service Adjustment Mode and set: VIDEO mode =
Standard, PICTURE = 100%, COLOR = 50%, HUE = 50%.
3. Connect an oscilloscope to Pin
3
of CN351 on the A
Board.
4. Select T2HU and T2CO with and .
5. Adjust with and for the V1 = V4 ± 0.1Vp-p (T2CO)
and V2 = V3 ± 0.1Vp-p (T2HU).
6. Write into memory by
then
.
7. Repeat steps 1-6 for V2HU & V2C0 and 4SHU & 4COL.
V1
V2
V3
V4
Vivid
Standard
Movie
Sports
Picture
(VPIC)
63
50
38
63
Brightnness
(VBRT)
31
31
31
31
Color
(VCOL)
38
31
31
38
Sharpness
(VSHP)
31
31
31
31
VM
1)
(VVM)
2
1
0
2
C Temp
1)
(VTRI)
2
1
0
2
Gamma
(VGMA)
3
2
2
2
Blk Comp
(VBLK)
1
1
1
1
V Apa Comp
(VAPA)
0
1
1
1
SRT ON/OFF
(VSRT)
1
0
0
0
NRMD
(VNRM)
0
0
0
1
1)
Setting of 3 is invalid for these registers
Click on the first or last page to see other KV-36FS12 service manuals if exist.