KV-34FS200 - Sony TV Service Manual (repair manual). Page 16

Read Sony KV-34FS200 Service Manual online

— 17 —
KV-34FS200
4-1.  SETTING THE SERVICE ADJUSTMENT 
MODE
1.  Standby mode (Power off).
2.  Press the following buttons on the remote commander within a 
second of each other: 
  DISPLAY  
 Channel  5 
 Sound Volume  + 
 Power
SERVICE ADJUSTMENT MODE ON
 
 
Disp.
(Item)
Item
data
0
VP
HSIZ
7
TV
Item
order
SERVICE
Mode
    
1.  The CRT displays the item being adjusted.
2.  Press   1 or  2 on the Remote Commander to select the item.
3.  Press  3 or   6 on the Remote Commander to change the data.
4.  Press MUTING then ENTER to write into memory.
SERVICE ADJUSTMENT MODE MEMORY
Disp.
(Item)
Item
data
SERVICE
0
VP
HSIZ
7
TV
Item
order
Green
Red
ENTER
MUTING
1.  Press 8  then ENTER on the Remote Commander to initialize.
Disp.
(Item)
Item
data
WRITE
0
VP
HSIZ
7
TV
Item
order
Carry out Step 1 when adjusting 
ID’s 0-7 and when replacing and 
adjusting IC003.
2.   DO NOT turn off set until SERVICE appears.
4-2.  MEMORY WRITE CONFIRMATION 
METHOD
1.  After adjustment, pull out the plug from the AC outlet, then replace 
the plug in the AC outlet again.
2.  Turn the power switch ON and set to Service Mode.
3.  Call the adjusted items again to confirm they were adjusted.
4-3.  REMOTE ADJUSTMENT BUTTONS AND 
INDICATORS
SECTION 4:  CIRCUIT ADJUSTMENTS
ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
Use the Remote Commander (RM-Y181) to perform the circuit adjustments in this section.
Test Equipment Required:   1. Pattern generator   2. Frequency counter   3. Digital multimeter  4.  Audio oscillator
RM-Y181
MUTING
(Enter into 
memory)
POWER
(Service Mode)
2
(Device Item Up)
4
Disp. (Item down)
8
(Initialize)
3
Item 
(Data up)
1
Disp. (Item up)
5
(Device item 
down)
ENTER
(Enter into 
memory)
0
(Remove from 
memory)
VOLUME (+)
(Service Mode)
6
Item 
(Data down)
DISPLAY
(Service Mode)
Page of 109
Display

Click on the first or last page to see other KV-34FS200 service manuals if exist.