Read Sony KV-30HS510 Service Manual online
— 18 —
KV-30HS510
4. Adjust SUB (right) side contrast according to Service Mode for SCON.
NO. Name
Control Function
02 SCON
SUB-CONT
2103-2
white
black
GND
VR2
VR1
VR
(KV-30HS510) = 1.67 ± 0.05 Vpp
5. Write data from Steps 3 - 4 above, into memory.
6. Set Service Mode
2-6.4. RF INPUT - SUB HUE/SUB COLOR
ADJUSTMENT
Preparation:
• Input a Color Bar signal to RF (75 IRE 75%).
• Input a Color Bar signal to RF (75 IRE 75%).
• Set picture mode: P&P (PRO MODE Reset).
• Picture:
Max
1. Set to Service Mode and adjust as follows:
NO. Name
Control Function
Avg. Data
01 RGBS
R ON
7
2170P-2
2. Connect an oscilloscope to pin 5 of CN9001 (B. DRV) on the C Board.
3. Adjust MAIN (left) side color according to Service Mode for SCOL.
4. Adjust MAIN (left) side color according to Service Mode for SHUE.
NO. Name
Control Function
03 SCOL
SUB COLOR
04 SHUE
SUB HUE
2103-1
5. Adjust SUB (right) side color according to Service Mode for SCOL.
6. Adjust SUB (right) side color according to Service Mode for SHUE.
NO. Name
Control Function
03 SCOL
SUB COLOR
04 SHUE
SUB HUE
2103-2
VB4
VB3
VB2
VB1
COLOR: VB1 < VB4 (=20 ± 40 mV)
HUE: VB2 < VB3 (=20 ± 40 mV)
7. Write data into memory.
2-7. WHITE BALANCE (CRT) AND SUB
BRIGHT ADJUSTMENT
Preparation
• Input an all white 480I (15.734 KHz) signal into the VIDEO 1 input
• Input an all white 480I (15.734 KHz) signal into the VIDEO 1 input
terminal to perform the White Balance (highlight, cut-off) adjustments.
The parameters to adjust are in the CXA2170P in Service Mode.
The parameters to adjust are in the CXA2170P in Service Mode.
32RVE
Click on the first or last page to see other KV-30HS510 service manuals if exist.