Read Sony KV-29SE10B Service Manual online
- 14 -
SECTION 2 DISASSEMBLY
2-1. Rear Cover Removal
Remove the rear cover fixing screws indicated and pull the
rear cover backwards away from the set.
rear cover backwards away from the set.
=>
=>
=>
=>
=>
=>
2-3. Service Position
Position the chassis as indicated to access the solder side of
the A PWB.
the A PWB.
2-4. Wire Dressing
Ensure that wires do not touch heatsinks and high temperature
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
20mm
20mm
=>
To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
2-2. Chassis Removal and Refitting
Click on the first or last page to see other KV-29SE10B service manuals if exist.