Read Sony KV-29LS40B Service Manual online
- 11 -
19
Specifications
Additional Information
TV system:
Depending on your country selection:
B/G/H. D/K
Depending on your country selection:
B/G/H. D/K
Colour system:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
VHF:
VHF:
E2-E12
UHF:
E21-E69
CATV:
S1-S20
HYPER:
S21-S41
D/K R1-R12,
R21-R69
Picture Tube:
Flat Display FD Trinitron:
29” (approx. 73 cm. measured diagonally)
Flat Display FD Trinitron:
29” (approx. 73 cm. measured diagonally)
Rear Terminals
1/
21-pin scart connector (CENELEC
standard) including
standard) including
audio/video
input,
RGB input, TV audio/video output.
2/
21-pin Scart connector (CENELEC
(SMARTLINK)
standard) including audio / video input, S
video input, selectable audio / video output
and Smartlink interface.
video input, selectable audio / video output
and Smartlink interface.
Audio outputs (Left/Right) - phono jacks
Side Terminals
3
S Video input – 4 pin DIN
3
video input – phono jack
3
audio input – phono jacks
headphones jack
S
S
Sound Output:
2 x 14 W (music power)
2 x 7 W (RMS)
2 x 14 W (music power)
2 x 7 W (RMS)
Power Consumption:
94 W
94 W
Standby Power Consumption:
0.5 W
0.5 W
Dimensions (w x h x d):
Approx. 771 x 592 x 553 mm.
Approx. 771 x 592 x 553 mm.
Weight:
Approx. 49 Kg.
Approx. 49 Kg.
Accessories supplied:
1 Remote Control (RM-947)
2 Batteries (IEC designated, AA/R6 size)
1 Remote Control (RM-947)
2 Batteries (IEC designated, AA/R6 size)
Other features:
• Teletext, Fastext, TOPtext
• Sleep Timer
• Smartlink (direct link between your TV set and a
• Teletext, Fastext, TOPtext
• Sleep Timer
• Smartlink (direct link between your TV set and a
compatible VCR. For more information on Smartlink,
please refer to the Instruction Manual of your VCR).
please refer to the Instruction Manual of your VCR).
• Dolby Virtual.
Design and specifications are subject to change without notice
Ecological Paper - Totally Chlorine Free
20
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Problem
Solution
No picture (screen is dark), no sound.
• Check the aerial connection.
• Plug the TV in and press the
• Plug the TV in and press the
button on the front
of TV.
• If the standby indicator
is on, press
button
on the remote control.
Poor or no picture (screen is dark), but good sound.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to the
factory settings.
factory settings.
No picture or no menu information from equipment
connected to the Scart connector.
connected to the Scart connector.
• Check that the optional equipment is on and press
the
button repeatedly on the remote control until
the correct input symbol is displayed on the screen.
Good picture, no sound.
• Press the
button on the remote control.
• Check that “TV Speakers” is “On” on the “Sound
Adjustment” menu.
• Check that headphones are not connected.
No
colour
on
colour
programmes.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings.
factory settings.
Distorted picture when changing programmes or
selecting teletext.
selecting teletext.
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
Wrong characters appear when viewing teletext.
• Using the menu system, enter to the “Language/
Country” menu and select the country in which you
operate the TV. For Cyrillic languages, we
recommend to select Russia country in the case that
your own country does not appear in the list.
operate the TV. For Cyrillic languages, we
recommend to select Russia country in the case that
your own country does not appear in the list.
Picture
slanted.
• Using the menu system, select the “Picture
Rotation” option in the “Detail Set Up” menu to
correct the slant.
correct the slant.
Noisy
picture
when
viewing
a
TV
channel.
• Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
(AFT) to obtain better picture reception.
• Using the menu system, select the “Noise
Reduction” option in the “Detail Set Up” menu and
select “Auto” to reduce the noise in the picture.
select “Auto” to reduce the noise in the picture.
No unscrambling or unstable picture whilst viewing a
scrambling channel with a decoder connected through
the Scart connector
scrambling channel with a decoder connected through
the Scart connector
2/
.
• Using the menu system, select the “Set Up” menu.
Then enter to the “Detail Set Up” option and set
“AV2 Output” to “TV”.
“AV2 Output” to “TV”.
Remote control does not function.
• Replace the batteries.
The standby indicator
on the TV flashes.
• Contact your nearest Sony service centre.
S
Additional Information
In case of problems, have your TV serviced by qualified personnel. Never opening the casing yourself.
Click on the first or last page to see other KV-29LS40B service manuals if exist.