KV-29FX65B - Sony TV Service Manual (repair manual). Page 9

9

When you select          there will be no personal pre-selection.          lets you make your own individual selection of themes,  
limiting the search to the marked ones.

1. Select       using 

v or V. Push B to enter. 

The menu Individual Settings is displayed.

2. Select the item you wish to mark using 

v or V. Confirm by pressing OK.

Repeat step 2 for all the items you wish to have in your list.

3. When finished with the list, select        using 

B and press OK.

 

1. Select a future programme in the column programme list using 

v or V. Press OK.

The long info menu is displayed. 

(only with Smartlink VCRs)

2. Select        using 

b and press OK.

This information is transferred to the VCR connected to your set.

3. Select VPS/PDC by pushing 

b repeatedly.

4. Select Speed using 

V.

5. Select VCR Setup using 

V.

6. Select       using 

B. Press OK.

You are back in the last menu.     

07 Tue

12:38

Address Mapping

The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.

If other values are set, the complete
combination will be scrolled.

Example:
if the DPWC is set to '63', the char-

Speed
Timer Prog

VPS/PDC

SP

VCR1

On

This channel has been set for a timer

First nextTView/EPG-Providers in Europe

SWISS

TXT

TPS / RINGIER

nexTView

Tue 07. 04 .98

With this setting on, you have the guaranteed recording of the whole broadcast 
should there be a change in the TV programme. This only works if the selected 
channel broadcasts a VPS/PDC signal. 

•

Select On or Off using OK.

Select between standardplay (SP) or longplay (LP) mode.With longplay you can 
record twice as much on a videotape. The picture quality, however, may suffer. 

•

Select SP or LP using OK.

Select which of the connected Smartlink VCRs you wish to programme.

•

Select VCR 1 or 2 using OK.

Speed

VPS/PDC

VCR1

On
SP

VCR Setup

Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you 
information on how to use the service. Please use a TV channel with a strong signal, otherwise there may be Teletext errors.

1. Select the TV channel which carries the teletext service you want to view.

2. Press the 

 button once to get Teletext only.

3. Press 

 twice for Mix mode.

4. Press 

 a third time to switch off Teletext. 

Input three digits for the page number using the numbered buttons on the remote control. If 
you make a mistake, type in any three digits then re-enter the correct page number.

Press the 

 or 

 buttons on the remote control to select the previous or next page.

A teletext page may consist of several sub pages. In this case an information line is displayed, 
showing the number of subpages. Select the sub page by pressing 

v or V.

Press the 

 button to freeze the page. Press again to cancel the freeze.

Press the 

 button to reveal information. Press again to conceal the information. 

(only available if the TV station broadcasts Fastext signals)
When the colour coded menu appears at the bottom of a page, press a coloured button on the 
remote control (green, red, yellow or blue) to access the corresponding page.

1. Press the numbered buttons on the remote control to select a teletext page which has

several page numbers on it (eg the index page).

2. Press the OK button.  
3. Press 

v or V to select the desired page number then press the OK button.  The requested

page is displayed after some seconds.

Programme

News

Sport

Weather

  25

153

101

  98

Programme 

News

Sport

Weather

  25

153

101

  98

m

m

m

216-02

01

03

04

05

06

07

08

02